Fiat 124 Spider Forum banner

1 - 1 of 1 Posts

·
Retired Moderator
Joined
·
676 Posts
Discussion Starter #1 (Edited)
With the amount of oil blow by getting into the engine I decided to pull all the plugs today at 4000 miles...they are NGK Iridium plugs part#SIKR9A 7...they were all torqued to 14 ft-lbs. and gapped at .026"...there were no wet plugs due to oil...all were dry...plugs 1 and 4 on each end of the block had slightly more black residue on the exposed threads and the insulator and ground electrode had more tan color on them...nothing remarkable here...very simple task on this engine...20 minutes for all 4 plugs at best and that includes getting all the tools out;)
 
1 - 1 of 1 Posts
Top