Fiat 124 Spider Forum banner
81 - 100 of 115 Posts

· Registered
2017 Fiat 124 ABARTH
Joined
·
1,122 Posts
Advanti Racing Storm S1 17x9, 4X100, 45mm offset wheels refinished in Burnt Copper Alloy Metallic with 235/40R-17 Falken Azenis tires.
Skunk2 coilovers with a 2 inch drop.
Wheel Tire Vehicle Automotive side marker light Car

Haters gonna hate...especially when they see what I've done to the car in the meantime :cool:
 

· Registered
Fiat 124 Spider w/ Abarth LSD & RM
Joined
·
350 Posts
Not my car, but i saw this car in sale with some nice turbine wheels... i think in silver it would work very nice in the lusso...

Vehicle Wheel Tire Car Automotive tire

Tire Wheel Car Vehicle Blue


I don't know if they are alfa romeo wheels or aftermarket, but sure they are 18".

EDIT: I found it, they are tomason tn16, 18x8 4x100 et35

Very nice wheels I like them on 124!
Wheel Automotive tire Tire Tread Vehicle
 

· Registered
2016 Launch Edition Abarth.
Joined
·
29 Posts
Enkei RPF1's.
17 x 7
9.85 lb
+35 offset
Lightweight alloy lug nuts.
Hankook Ventus RS4's 215/45
Wheel Tire Car Vehicle Sky
 

· Premium Member
2020 Fiat 124 Abarth, manual, Chiaro Silver
Joined
·
268 Posts
yeah....nice wheels but not 9.85lbs......
 

· Registered
2016 Launch Edition Abarth.
Joined
·
29 Posts
  • Like
Reactions: Mikeydred

· Registered
2017 Fiat 124 ABARTH
Joined
·
1,122 Posts
You might want to triple check. GoodWin Racing specs the 17x7 35mm offset Enkei RFP1 at 14.8 lbs.
HERE is the link.
Either way, that is a nice lightweight wheel and it looks great on that black ABARTH Spider!
 

· Registered
2019 Abarth, Black w/Matte hood & trunk, EC XPipe, Tune & V2 Air
Joined
·
80 Posts
Advanti Racing Storm S1 17x9, 4X100, 45mm offset wheels refinished in Burnt Copper Alloy Metallic with 235/40R-17 Falken Azenis tires.
Skunk2 coilovers with a 2 inch drop.
View attachment 90701
Haters gonna hate...especially when they see what I've done to the car in the meantime :cool:
Any rubbing at all?
 

· Registered
2017 Fiat 124 ABARTH
Joined
·
1,122 Posts
Any rubbing at all?
At full lock, when reversing into a parking space, I can hear a bit of rub. Visual inspection shows no liner damage. Probably could eliminate it by using a zip tie or a heat gun to reshape liner, but it is so rare I haven't bothered with it.
 
  • Like
Reactions: NellyNel 1TWO4

· Registered
Joined
·
13 Posts
Might as well add mine to the mix. Drag DR19 in 18x7.5" +42. It should be looking better after I get the ST coilovers and some spacers on it. There is currently 8mm front and 18mm gap from fender to wheel lip. I plan on 5mm/15mm spacers plus the bit of camber when lowering an inch. I kinda wish the wheels were 16 or 17", but that may change after lowering. I do like the brushed lip to go with the windshield surround and mirrors.
Wheel Tire Sky Cloud Vehicle

Wheel Tire Vehicle Car Automotive tire

Tire Wheel Car Vehicle Automotive tire
 

· Registered
Joined
·
730 Posts
Did you have problem to import them since they are not DOT approved?
 
81 - 100 of 115 Posts
Top