Fiat 124 Spider Forum banner
1 - 2 of 2 Posts

·
Registered
Abarth 124 Spider in Isola d'Elba Blue with Heritage Pack
Joined
·
152 Posts
Discussion Starter · #1 ·
Hey all,

I am in the process of installing new springs and spacers for my A124.

On installing the front spacers, which are 15mm Eibach System4 (with the integrated bolts), I have noticed that the original hub bolts protrude by approximately 5mm too much, and therefore the wheel does not sit flush and cannot be fitted.

The only remedy to this, I see, is to remove approximately 5mm from each of the original bolts.

Could anyone who has the Abarth 124 with original wheels and the Eibach 15mm spacers confirm that this is a necessity?

I was hoping it would be a straight-forward fit.

Many thanks in advance. :D
 
1 - 2 of 2 Posts
Top