Fiat 124 Spider Forum banner

Wheel spacers...15mm OK on OEM wheels for clearance?

5097 Views 17 Replies 9 Participants Last post by  Yoren
If I go with 15mm spacers (per side), is there sufficient clearance within the wheel to house the protruding nuts from the spacer?

I have read as much as I can and will liklely go with Eibach system 4 or DRMs, but I know for 15mm in particular that there needs to be sufficient cutout inside the wheel to house the stud.

1 - 1 of 18 Posts
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.